Description
This listing is for an American-built SPX Fenner Stone power unit with a built-in limit switch. Many lifts manufactured by Worth Equipment in Mansfield, Texas have an overhead beam that require a power unit with built-in kill-switch.
On these 2-post lifts, a thin wire goes across the top of the lift, just below the overhead beam, from one column across to the other and then down to a pin (see picture) on the top of the control box. When the vehicle is raised and should the top of the vehicle engage the wire it will pull the pin and KILL the power before damage occurs to the vehicle, the lift or both.
This power unit is a direct match for WORTH Lift 2-post models 9000CF, 9000ACF and 10000ACF. That means this power unit has the proper internal pump (flow-rate) and relief valve pressure to achieve your lifts’ rated lifting capacity.
SPX Stone Hydraulics (formerly Fenner Stone) is located in Rockford, Illinois and is the leading power unit manufacturer in the U.S. market. This American-built product will provide years of service and reliability with parts available long after the 12-month warranty.
Specifications as follows:
•2 Horsepower
•208-230 volt, 60 cycle (ready for hard-wire)
•Single Phase
•3450 RPM
•4.0 Gallon Reservoir
•Running amperage at 230v is 18 amps.
The 4.0 gallon plastic reservoir measures 19 1/2″ overall length from the neck to the bottom and is 7″ x 7 1/2″ around.
Overall length of the power units is 31 1/2″ in length. Shipping weight 52 pounds.
If you have any doubt whether this power unit will work on your lift please contact us with the make and model at (331) 442-9150 and we will serve you!
This power unit will interchange with other brands such as MTE, Webster, JS Barnes, Monarch and Parker and other SPX Fenner Stone power units.
Power units are in-stock and are ready for shipping.
