Description
This power unit is a direct replacement for the OEM AB-1296 (95011) manufactured by the same manufacturer, SPX Fenner Stone and is also a direct replacement for the Ben Pearson 95011.
This power unit features a built-in limit switch to accept a thin cable that kills the power on a tall vehicle. For Ben Pearson 2-posters that do not require the use of this kill switch, please have your electrician wire around it during installation.
If you are running 208-230v Single Phase this power unit is compatible with following Ben Pearson 2-Post models; 9000 A/S/F/AI/SI/SA/FC/ADJ; 10000 SA/SI; 12000 S/SI; LMP 7/9; LMO 7/9; LAS 7/9; NDL 5/7; LPS 9; LFS 9.
Compatible 4-Post models are: 12000-4 series; All 12000 lb. capacity models; LMT 7/9/12; SST 9/12; LTC 9; and QLR 9.
Please note: This power unit will NOT run any Ben Pearson lift that has a lifting capacity of 22,000 pounds or more. Please call for details.
SPX Stone Hydraulics (formerly Fenner Stone) is located in Rockford, Illinois and is the leading power unit manufacturer in the U.S. market. This American-Built product will provide years of service and reliability with parts available long after the 12 Month Warranty.
Specifications as follows:
•2 Horsepower
•208-230 volt, 60 cycle (ready for hard-wire)
•Single Phase
•3450 RPM
•4.0 Gallon Reservoir
•Running amperage at 230v is 18 amps
The 4.0 gallon plastic reservoir measures 19 1/2″ overall length from the neck to the bottom and is 7″ x 7 1/2″ around.
Overall length of the power units is 31 1/2″ in length. Shipping weight 52 pounds.
This power unit will interchange with other brands such as MTE, Webster, JS Barnes, Monarch and Parker and other SPX Fenner Stone power units.
If you have any doubt whether this power unit will work on your lift please contact us with the make and model at
(331) 442-9150.
“Live” happy humans are ready to receive your call.