This listing is for (ONE) quality aftermarket seal kit for Rotary In-Ground Low-pressure lifts with 8-1/2″ diameter pistons. Features one seal and one spring along with instructions.
Please take a look for the “Jack Number” found on your cylinder. You will find markings etched into the cylinder, along the side, just below the top to the cylinder under the superstructure. See the picture for the location. If your “Jack Number” reads JG149 thru JG187 and JG190, then this is your kit. If your “Jack Number” reads JG128 thru JG148 please call us for more information as you will need a conversion kit.
Please make sure your existing gland ring is aluminum with 6-holes and a seventh for a bleeder. Please use a magnet if necessary. If your gland ring is stamped “JG620”, then this is your kit. If your gland ring is Cast Iron and has 8 holes with a stamping “JG512” – then is NOT your kit – please call us, these lifts are newer than 1988. Also, if your old gland ring is STEEL but has 6-holes and a seventh for a bleeder, this is NOT the kit you need ………..please call us!
Consists of the everything pictured including the seal; spring and installation instructions.
These items meet or exceed OEM standards! Rotary JG220 JG220KIT – Equivalent to BH-1721.
If you are resealing a both pistons on one lift, please order two (2) kits
If you have any questions please feel free to call us at either (331) 442-9150 or (331) 442-9154.
ALL calls are taken by courteous and knowledgeable Owner-Operators! We truely care about your business!