Description
Product Information
One (1) Long Overhead Hydraulic Hose for Bend Pak, Magnum by Bend Pak, BendPak and Pro Lift by Bend Pak models MX10CX and MX10ACX – ONLY! ONLY! ….. AND please make sure your lift’s overall height does NOT exceed 145″ or 12′ – 1″
The Bend Pak MX10 Series is a 3-hose system. First, the short power unit hose goes to a TEE fitting. From the TEE there are two hoses. One short hose goes to the power side cylinder (closest cylinder to the pump) and the hose in this listing is the long overhead hose that goes up, over the top and down the the far side cylinder.
These are actual photos of the item you will receive….not some stock photo or similar item.
Product-Lift Compatibility Notes
This hose fits 2-post MX10CX and MX10ACX lift models by Bend Pak, Magnum Lift, and Pro Lift, manufactured in 2003 or later.
The MX10CX and MX10ACX have column of 145″ (12′ 1″) from the floor to the top of the column.
These two models are also the WIDE versions with a total OUTSIDE width across the floor, from outside the footplate to outside of other footplate of 145.”
IF YOUR LIFT MEASURES 132″ wide YOU HAVE THE NARROW VERSION, MX10C or MX10AC. You can still use these hoses but note that the long overhead hose will be 13″ longer than what is required. You can coil the extra hose to take up the slack.
Please note that this hose WILL NOT work on any other lift brand or lift model within the Bend Pak product line. It is specifically for the MX10CX and MX10ACX.
Ref: 5570775, BH-7479-350.
Sales Tax
Illinois customers are subject to 7.25% sales tax.
Questions?
Not sure what you need? Please call our product experts at (331) 442-9150. We’re happy to help!
Would you like an expedited shipping quote? Please call customer service at (331) 442-9154.
