Description
This listing is for one (1) quality aftermarket combo kit for Rotary In-Ground Low-pressure lifts with 8 1/2″ diameter pistons. Features a 6-hole aluminum gland ring plus a seventh hole for a bleeder.
FIRST, LET’S IDENTIFY YOUR LIFT.
Please make sure your existing gland ring has 6-holes and a seventh for a bleeder
Take a look-see at the gland ring around the piston at finished floor. If the ring is etched with the number “JG620” then this is the correct combo kit for your jack assembly.
If you’re still not sure please read on.
Take a look at the markings (etchings) along the side of the piston, just below the top. See illustration for the location. If the etchings are JG118 thru JG127 then this is your kit.
If the etchings are JG149 thru JG187 and JG190 (see illustration), then this is your kit.
If your gland ring is Cast Iron and has 8 holes with a stamping “JG512” – then is NOT your kit – please call us.
If your “Jack Number” reads JG128 thru JG148 please call us for more information as you will need a different kit.
The kit consists of the everything pictured including the seal; aluminum gland ring; spring; six hex head cap screws; bleeder screw and instructions.
These items meet or exceed OEM standards! Replaces Rotary J136. Equivalent to BH-1721/21B.
If you are resealing a both pistons on one lift, please order two (2) kits
If you have any questions please feel free to call us at either (331) 442-9150 or (331) 442-9154.
ALL calls are taken by courteous and knowledgeable owner-operators! We truly care about your business!