Description
This listing is for (ONE) quality aftermarket combo kit for Rotary In-Ground Low-pressure lifts with 10 5/8″ diameter pistons. Features a 6-hole aluminum gland ring plus a seventh hole for a bleeder.
FIRST LET’S IDENTIFY YOUR LIFT
Please make sure your existing gland ring has 6-holes and a seventh for a bleeder and you have a single-post Rotary in-ground lift with a 10 5/8″ diameter piston.
Take a look-see at the gland ring around the piston at finished -floor. If the ring is etched with the number “JK622” then this is the correct combo kit for your jack assembly.
If you’re still not sure please read-on.
Take a look at the markings (etchings) along the side of the piston, just below the top. See illustration for the location. If the etchings are JK158 thru JK1136 and up then this is your kit.
If your gland ring is Cast Iron and has 8 holes with a stamping “JK515” – then is NOT your kit – please call us.
The kit consists of the everything pictured including the seal; aluminum gland ring; spring; six hex head capscrews; bleeder screw and instructions.
These items meet or exceed OEM standards! Replaces Rotary J134. Equivalent to BH-1799/99B.
If you have any questions please feel free to call us at either (331) 442-9150 or (331) 442-9154.
ALL calls are taken by courteous and knowledgeable Owner-Operators! We truly care about your business!