Why spend over $500.00 for an electric motor – only when you can buy an entire American-Built power unit for $489.00 with FREE UPS Ground Shipping AND and a 12 month warranty?
This power unit is a direct-match replacement for your expensive and problematic Global Hydraulics (GHS) Italian-made power unit for ROTARY LIFT 2-post models SPO10 and SPOA10, both 10,000 pound lifting capacity. If your lift has a capacity of 9000 or less please see our other listing or call us.
Please note: This power unit is 2HP, 208-230 volt, 60HZ, Single Phase Current. If you are running 3-Phase current please call for more information.
SPO10 or SPOA10 only!
PLEASE NOTE: This listing is NOT for Rotary Lifts with a 9000 lb. lifting capacities or less. For these models see our other listing as they require LOWER relief valve pressures.
This power unit is NOT for ROTARY’s In-Bay Style Lifts where your lift is operated by a keypad that is remote from the power unit. If you need clarification of “In-Bay” please give us a call before ordering at (331) 442-9150
This power unit replaces the COMPLETE P1120KIT GHS (Global Hydraulic) power unit.
SPX Stone Hydraulics (formerly Fenner Stone) with its World Headquarters in Rockford, Illinois is the leading power unit manufacturer in the U.S. market.
This American-Built product is built and tested in Rockford, Illinois and will provide years of service and reliability with parts available long after the 12 Month Warranty.
Specifications as follows:
•208-230 volt, 60 cycle (ready for hard-wire)
•4.0 Gallon Reservoir
•Running amperage at 230v is 18 amps.
The 4.0 gallon plastic reservoir measures 19-1/2″ overall length from the neck to the bottom and is 7″ x 7-1/2″ around.
Overall length of the power unit is 31-1/2″ in length. Shipping weight 52 pounds.
If you have any doubt whether this power unit will work on your lift please contact us with the make and model at
(331) 442-9150 or (331) 442-9154.
All calls are taken by courteous and knowledgeable Owner – Operators!