Description
This Listing is for ONE Set-of-2 Equalizer Cables for BendPak Lift Model XL-7CX or XL-9CX .
The XL-7 series has a lifting capacity of 7000 lbs and the XL-9 series 9000 lbs.
In order to assure accuracy please read the following guidelines and take a look-see at your lift.
Early XL-7CX and XL-9CX models used 1/4″ diameter wire rope cable.
First – you must measure the diameter of the wire rope cable on your lift. If you measure 1/4″ diameter then these are NOT the correct cables for your lift. Please call (331) 442-9150 or (331) 442-9154 for more information.
If your cable measures 3/8″ diameter then please read on.
Before placing your order you must measure the following items on your lift to see if they match the data below for an XL-7CX or XL-9CX.
1. These models feature a clear-floor with an overhead beam.
2. Please measure the height of the column. A STANDARD height column measures 145″ or 12′ 1″
3. Next measure across the floor from outside the column to outside the column including the footprint of the baseplate – this measurement should be 145″
If ALL your measurements match the above three points and your cables are 3/8″ in diameter then you have a Standard XL-7CX or XL-9CX and the cables in this listing are the correct ones.
Please note that there are FOUR other XL-7 and XL-9 Series models with various cable lengths. If you find your measurements to be different than the above, then you may have one of the other 4 models. Please see our other listings or call us for assistance at (331) 442-9150 or (331) 442-9154. ALL calls are taken by courteous and knowledgeable Owner-Operators.
Again, these cables feature 3/8″ diameter wire rope with 5/8″-11 swaged threaded fittings on both ends, as pictured. Adjusting hardware is supplied.
If you have removed the cables from the lift and would like to verify your measurement please feel free to call us.
ALL cables are swaged, pull-tested and manufactured right here in the USA by American Workers. If you have any questions or doubt as to whether these are the correct cables for your lift…. please give us a call.
We Welcome your Inquiries!
If you have any questions on this or any other listing please feel free to give us a call.
ALL calls are taken by courteous and knowledgeable owner-operators.
(331) 442-9150 or (331) 442-9154
