Description
This listing is for one (1) equalizer cable pulley/sheave for many PMW 2-post lifts, SNAP-ON 2-post lifts and LEGEND 2-post lifts made by PMW with a lifting capacity of 9000 lbs.
If your lift is 7000 lb. capacity this NOT the correct pulley…..please call for details but please read on!
This sheave is 3 1/2″ in diameter x 3/4″ wide with a 1″ center hole. It is important to check before ordering that the center hole is 1″. There is also a version with a 3/4″ center hole.
If you cannot get to the pulley while its on the lift to measure the center hole then maybe you can measure the OD of the pin that goes thru it.
The pulley has a radius for 5/16″ diameter wire rope.
You will find this pulley on the following PMW and LEGEND models: OH9 and OH9000.
SNAP-ON models YA9001.
Equivalent to part numbers 000945 and BH-7435-73.
If you have any doubt whether you are ordering the correct part or you have any questions, please contact us at
(331) 442-9150 or (331) 442-9154.
ALL calls are taken by courteous and knowledgeable owner-operators.