Description
This listing is for ONE Set-of-4 “Tubular” style arm restraints for the following Rotary 2-Post “symmetrical” models SP88; SPO88 SP98 and SPO98.
Please note: Tubular style arm restraints for Rotary Lifts are model-specific.
The SP88 is a floorplate 7000 pound capacity lift. The SPO88 is also a 7K capacity lift but with on Overhead Beam (clear-floor).
The SP98 is a floorplate 9000 pound capacity lift and the SPO98 is the same but with an overhead beam.
These models were made in the mid-1980s until the early 1990s.
You will notice on your lift that all 4 arms, front and rear, are the same length. In this kit you will receive four identical arm restraints. Front to rear and side to side doesn’t matter, all four arm restraints are the same. The kit comes with mounting clevis pins.
Your lift MUST still have the existing tabs that were originally welded onto the arms and carriages by Rotary to accept these arm restraints. If they are missing or knocked off you will need to fabricate them. They do not come with the kit. Please take a look-see before ordering.
Please note: The picture shown here is for reference only – showing the “style.” Rotary “Tubular” arm restraints are model-specific. The actual kit you will receive in this lising may be slightly different than pictured.
Other older Rotary models which use this style arm restraint are: SP55; SP84; SPO84; SP94; SPO94; SP88; SPO88; SP98; SPO98 and SPOA98 – please call us for more information at (331) 442-9150 or (331) 442-9154.
If your lift does not have any tabs it could be because it never had arm restraints to begin with. Some early lift models did not have arm restraints. Fortunately, there are retro-fit kits avalable that will provide everything you need, including tabs, to bring your lift up to today’s safety standards…..contact us for more information.
Newer Rotary Lift models feature half-moon gears. We have them too – please contact us. Unfortunately, lifts with this “tubular” style cannot be converted to the current gear style, sorry.
We are proud to say that this quality product is manufacturd and assembled in the USA by American machinists and welders.
Equivalent to Rotary FJ7359KIT, ALP-7508-14 and BH-7508-14.
If you have any questions please feel free to call us at either (331) 442-9150 or (331) 442-9154.
ALL calls are taken by courteous and knowledgeable Owner-Operators. We care about your business!